FreeNAS Corral 10.x setup

From FreeNAS using Active Directory Wiki
Revision as of 01:43, 13 April 2017 by Mauirixxx (talk | contribs) (Initial connection: that's it for today)

Jump to: navigation, search

Before we start

  • We used a virtualized setup in order to create this walkthrough, using generic domain & computer names where possible.
  • We used the private IP address range of 192.168.15.x - obviously you'll want to replace our internal IP addresses with your own
    • We used a single Active Directory domain controller, to keep things simple. We then configured the following network settings, which is reflected throughout this document:
      • Gateway: 192.168.15.1
      • DNS: 192.168.15.3
      • NTP: 192.168.15.3
      • DC (Domain Controller): 192.168.15.3
      • FreeNAS Corral: 192.168.15.4
  • Where appropriate, we'll make a note of where additional server IP's can be entered, for redundancy
  • Generic Password: HorseBattery@2017

Getting started with FreeNAS

Initial connection

  • When FreeNAS Corral 10.0 is first installed, the network adapter is set to DHCP - we will change this a few steps down. We will be configuring FreeNAS purely from the webUI, so make a note of the IP on the FreeNAS server console:

FreeNAS Corral 10.0 DHCP on first boot.png

  • Use your favorite web browser to connect to that address - The FreeNAS webUI will prompt you for a password, for the default user root using the password you set during the installation routine.
  • To change from a dynamic IP to a static IP, after you log in, on the left menu click on Network -> Interfaces -> "Interface name" (dhcp)

FreeNAS Corral 10.0 Change Interface DHCP Setting.png

  • On the next screen, uncheck DHCP, and then:
    • Click on Add address
    • FreeNAS Corral 10.0 Add address.png
    • Click the IPv4 radio button, and add 192.168.15.4 under Address, and 255.255.255.0 under Subnet mask / Prefix length and click Done, then click Save at the bottom of the page, and then click Save again.
    • FreeNAS Corral 10.0 Enter IPv4 address and subnet mask.png