User:Mauirixxx/FreeNAS 9.3 and Server 2012 R2 Domain Controller
From FreeNAS using Active Directory Wiki
< User:Mauirixxx
Revision as of 00:05, 2 February 2016 by Mauirixxx (talk | contribs) (→notable freenas 9.2 -> 9.3 differences: forgot to enable AD services)
- install pfsense w/ 2 nics, WAN & LAN (WAN = DHCP, LAN = 10.1.1.1)
- disable dhcpd and dns forwarding in pfsense
- install windows server 2012 r2
- assign IP 10.1.1.2
- install active directory, dns, dhcp
- domain name is mauiri.xxx
- dhcp scope = 10.1.1.100-199, gateway = 10.1.1.1, dns = 10.1.1.2
- create reverse DNS zone, insert record for DC
- create router (10.1.1.1) & freenas (10.1.1.3) dns records, create ptr records automatically (router.mauiri.xxx & freenas.mauiri.xxx respectively)
- load up active directory users and computers
- create a user record name freenasadmin
- password is HorseBattery@2016
- create a computer record named freenas
- create a user record name freenasadmin
- realize all the prep work for Server 2008 R2 is the same that you'll do in 2012 R2 and stop documenting it
notable freenas 9.2 -> 9.3 differences
- NTP is located elsewhere:
- System -> General -> NTP Servers
- Timezone (may have biffed the naming)
- System -> General -> Timezone
- Active Directory is no longer located on System -> General - setup after storage pool is created
- Create storage pool
- NOW create Active Directory config
- Directory (or Directory Services on left menu column) -> Active Directory
- Domain name: mauiri.xxx
- Username: freenasadmin
- Password: HorseBattery@2016
- Enable: checked
