Difference between revisions of "User:Mauirixxx/FreeNAS 9.3 and Server 2012 R2 Domain Controller"
From FreeNAS using Active Directory Wiki
m (→notable freenas 9.2 -> 9.3 differences: forgot to enable AD services) |
m |
||
| Line 1: | Line 1: | ||
| − | * install pfsense w/ 2 nics, WAN & LAN (WAN = DHCP, LAN = | + | * install pfsense w/ 2 nics, WAN & LAN (WAN = DHCP, LAN = 192.168.15.1) |
* disable dhcpd and dns forwarding in pfsense | * disable dhcpd and dns forwarding in pfsense | ||
* install windows server 2012 r2 | * install windows server 2012 r2 | ||
| − | ** assign IP | + | ** assign IP 192.168.15.3 |
** install active directory, dns, dhcp | ** install active directory, dns, dhcp | ||
| − | *** domain name is | + | *** domain name is mai-dev.net |
| − | *** dhcp scope = | + | *** dhcp scope = 192.168.15.100-149, gateway = 192.168.15.1, dns = 192.168.15.3 |
** create reverse DNS zone, insert record for DC | ** create reverse DNS zone, insert record for DC | ||
| − | ** create router ( | + | ** create router (192.168.15.1) & freenas (192.168.15.4) dns records, create ptr records automatically (router. & freenas.mauiri.xxx respectively) |
** load up active directory users and computers | ** load up active directory users and computers | ||
*** create a user record name freenasadmin | *** create a user record name freenasadmin | ||
Latest revision as of 00:43, 13 April 2017
- install pfsense w/ 2 nics, WAN & LAN (WAN = DHCP, LAN = 192.168.15.1)
- disable dhcpd and dns forwarding in pfsense
- install windows server 2012 r2
- assign IP 192.168.15.3
- install active directory, dns, dhcp
- domain name is mai-dev.net
- dhcp scope = 192.168.15.100-149, gateway = 192.168.15.1, dns = 192.168.15.3
- create reverse DNS zone, insert record for DC
- create router (192.168.15.1) & freenas (192.168.15.4) dns records, create ptr records automatically (router. & freenas.mauiri.xxx respectively)
- load up active directory users and computers
- create a user record name freenasadmin
- password is HorseBattery@2016
- create a computer record named freenas
- create a user record name freenasadmin
- realize all the prep work for Server 2008 R2 is the same that you'll do in 2012 R2 and stop documenting it
notable freenas 9.2 -> 9.3 differences
- NTP is located elsewhere:
- System -> General -> NTP Servers
- Timezone (may have biffed the naming)
- System -> General -> Timezone
- Active Directory is no longer located on System -> General - setup after storage pool is created
- Create storage pool
- NOW create Active Directory config
- Directory (or Directory Services on left menu column) -> Active Directory
- Domain name: mauiri.xxx
- Username: freenasadmin
- Password: HorseBattery@2016
- Enable: checked
